PG 8583 CD [WW ADP CM] - Safety
View product
Conductivity monitoring
Safety through controls
Residues from chemical agents during the final rinse phase can compromise the reprocessing result. Conductivity monitoring of the wash water facilitates the detection of such residues and their reduction to a defined level through further rinsing. This means that the reprocessing is more reliable, more resource-friendly and also reproducible.
Spray arm monitoring
Safety through controls
For optimum reprocessing results, the rotation speed of the spray arms must always lie in a prescribed interval. Through the contact-free monitoring of all machine and basket spray arms, problems such as the build-up of foam or an obstructing load item can be detected early on. As a result, spray arm monitoring contributes to the reliable reproduction of the validated reprocessing quality.
Spray arm pressure monitoring
Safety through controls
A variety of factors, such as a faulty basket connection or an excessive build-up of foam, can lead to a reduction in the wash pressure. Monitoring the wash pressure in the washer-disinfector guarantees optimum process operations, so that the appliance always produces reliable reprocessing results.
HEPA filters
Pure air
Even in the case of instruments with a complex design, laboratory glassware or breathing apparatus, every surface is quickly and thoroughly dried with hot air. The ambient air drawn in for this process must first pass through a highly effective HEPA filter. Thus the influx of undesirable suspended solids into the wash cabinet is prevented and the load items are protected against recontamination.
Process documentation
End-to-end documentation
The complete minuting and documentation of all the reprocessing processes ensures the highest level of safety for patients and users. Miele Professional offers numerous documentation solutions for every need. In addition, the analysis of the recorded process data facilitates the effective optimisation of the entire reprocessing operation.
Waterproof System (WPS)
Protection against flooding
The Waterproof System protects against water damage with a dual solenoid valve at the stopcock. If the first valve does not close, the second one interrupts the water intake. The double skinned inlet hose provides the highest level of protection: In the event of damage to the inner hose, water flows through the outer sleeve into the sump. Intelligent sensor technology detects leaks and in an emergency also stops the intake of water.