Fault F5

Remove and clean the roller brush as follows:

• Remove the dust box.

• Place the robot vacuum cleaner upside down on a level, clean surface.

• Remove the roller brush cover.

• 

• Remove the roller brush.

• 

• With a pair of scissors, cut any threads or hairs that have become entangled on the roller brush. To guide the scissors, move along the guide track in the roller.

• 

• Remove the threads and hairs with the comb end of the cleaning brush.

• 

• Refit the roller brush. Make sure you position it carefully.

• 

• Lock the cover, making sure it clicks into position. Make sure you position it carefully.

• 

• Reinsert the dust box into the robot vacuum cleaner.

• To achieve the best possible cleaning results, replace the roller brush with a new one after 1 year.

If the fault persists, please contact us or book a repair appointment online.

Remove the roller brush and clean the bearing points as follows:

• 

• Pull the bearing cover off the roller brush and remove any threads or hairs that have wound themselves around the bearing.

• Refit the bearing cover, making sure it clicks into position.

• Refit the roller brush. Make sure you position it carefully.

• Lock the cover, making sure it clicks into position.

• Reinsert the dust box into the robot vacuum cleaner.

• To achieve the best possible cleaning results, replace the roller brush with a new one after 1 year.

Remove and clean the Corner Brushes as follows:

• Place the robot vacuum cleaner upside down on a level, clean surface.

• Using both hands take hold of two opposite elastic Corner Brush holders and pull them upwards to remove them.

• 

• Remove threads and hair using the wiper which is located on the bottom of the cleaning tool.

• Hold the wiper over a bin and press the button at the top of the wiper several times until all threads and hair have fallen out.

• 

• Press the two cleaned Corner Brushes carefully onto their pins until they audibly engage.

• Take care to comply with the markings L and R.

• 

• To achieve the best possible cleaning results, replace the Corner Brushes with new ones after 1 year.

Pull the Corner Brush out from underneath the object.

Untangle the Corner Brush from the carpet.

RX3: use the Corner Brush with 6 arms for deep-pile carpets.