Spray jet during Steam smoothing insufficient

Clean the fluff filter as follows:

• 

• Remove the condensate container.

• 

• Pull out the spout.

• 

• Guide the end of the hose through the opening and hold it securely with one hand.

• Use your other hand to pull the fluff filter off the hose.

• Rinse the fluff filter with a water jet until all the fluff has been removed.

• Refit the cleaned fluff filter onto the hose.

• Now feed the hose with its fluff filter attached into the condensate container.

• Correctly refit the spout in the opening in the condensate container.

The spray jet is located in the top left of the door opening of the tumble dryer.

Remove the spray jet and replace it with a new one.

You can replace the spray jet yourself using a special tool. To obtain the spray jet and relevant tool, please contact the Miele Customer Service Department.

As soon as you have received the spray jet and tool, please proceed as follows:

• 

• Attach the tool to the spray jet.

• Turn the tool anti-clockwise to unscrew and remove the spray jet.

• Insert the new spray jet into the tool.

• Turn the tool clockwise to screw the spray jet securely in position.